伟德ios版官方下载_Betvictor12_BETVICTOR伟德官网 - Insulation Products-Jiangsu Ice-City Insulation Materials Stock Co. Ltd

Resin Rich Mica Tapes

These products use micapaper as bases material, both or single side with glass fabric or film with epoxy or heat resistant resin as adhesives, suitable for high voltage motors. generator, traction motor as ground insulation.

Type of products and technical index

Designation	Unit	Type of products
Designation	Unit	5438-1	5440-1 Te5440-1	Te5440-1K	DY54 48-1	DY54 49-1
Thickness	㎜	0.10	0.14	0.14	0.14	0.11
Tolerance	mm	±0.02	±0.02	±0.02	±0.02	±0.02
Micapaper	g/㎡	67±5	86±4	≥80	83±7	75±5
Resin Content	g/㎡	67±4	78±6	74±9	≥38.5%	46±9
Glass Fabric	g/㎡	36±4	36±4	36±4	36±4	36±4
Film Content	g/㎡	——	——	——	39±5	——
Voletile Content	%	≤2.0	≤1.5	≤1.5	≤2.0	≤2.5
Dry Total Weight	g/㎡	170±14	200±14	≥177	196±20	157±13
Dielectric Strength	Mv/m	≥35	≥45	≥44	≥35	≥24
Tensil Strength	N/㎝	≥80	≥100	≥100	——	≥100
Resin Flow	%	≥45	≥45	≥45	——	——
Gel time	min	Discussed by bothides		1～5/170℃ 10～40/130℃	——	——
Others		——	Dielectic loss tangent 155℃ ≤4%		——	——

Medium resin micapaper tape

Product specification:these products are made of micapaper as base materil backed with glass fabric,PET film,PI or PICR film etc. and heat resistant adhesives which are used as large and medium sige h.v.motor,wind power generator,traction motor as ground insulation.

Type of products and specification

Designation	Unit	Type of products
Designation	Unit	DY7329B-C	DY7328	DY5444-1A	DY5444-1B	DY5444-1D	DY5444-1S	DY5446-1P	DY5451-1	DY7327B
Thickness	㎜	0.14	0.16	0.14	0.14	0.14	0.14	0.12	0.14	0.11
Thickness tolerance	mm	±0.02	±0.03	±0.02	±0.02	±0.02	±0.02	±0.02	±0.02	±0.02
Mica content	g/㎡	75±5	≥23%	≥80	75±5	150±5	150±10	70±8	83±7	70±8
Resin content	g/㎡	47～60	18±6	47～60	48±9	32～45	34～47	54±9	37～42	27～54
Glass fabric	g/㎡	19±3	30±4	19±3	19±3	30±4	21±3	21±2	36±4	18±2
Film content	g/㎡	39±5	——	35±5	35±5	——	18±2	30±5	39±5	30±5/18±2
Voletile Content	%	≤4	——	≤4	≤4	≤2.0	≤2.0	≤3	≤1.5	≤2
Dry Total Weight	g/㎡	190±20	200±20	190±20	170±20	215±20	225±25	180±20	192±19	180±20
Dielectric Strength	mV/mm	≥40	≥3	≥40	≥40	≥40	≥30	≥45	≥45	≥45
Tensile strength	N/㎝	≥80	≥700	≥60	≥60	≥100	≥80	≥60	≥100	≥60
Porosity	s/100ml	——	——	——	——	——	——	——	≥45	——

Dry Micapaper Tape

Product description:These products use micapaper as bases materal, both or sigle side with glass fabric or film with epoxy or heat resistant resin as adhesives, suitable for high voltage motors. generator, traction motor as ground insulation.

Type of products and technical index

Designation		Thickness(mm)	Quantitative mica(g/㎡)	Adhesive quantitative(g/㎡)	Quantitative glass cloth(g/㎡)	Film quantitative(g/㎡)	Volatile content(%)	Total mass of dry material per unit area(g/㎡)	Dielectric strength(mV/mm)	Tensile strength(N/㎝)	Air permeability(s/100ml)
P r o d u c t m o d e l	5442-1	0.14±0.02	160±13	9±3	25±5	——	≤1.0	203±20	≥1.5	≥80	≤800
	DY7326D(G)	0.15±0.02	180±13	20±6	25±5	——	≤1.0	203±20	≥1.5	≥80	≤1000
	DY5446-1D	0.13±0.02	160±13	6±3	——	35±5	≤1.5	205±20	≥6	≥30	——
	DY7329B-1 DY7329B-1CR	0.11±0.02	65±5	12±4	19±2	39±5	≤1.0	135±15	≥40	≥40	——
	DY7329B-2 DY7329B-2CR	0.075±0.015	65±5	5±3	——	39±5	≤1.0	109±12	≥50	≥32	——
	DY7329H	0.1±0.015	100±10	9±3	——	43±5	≤1.0	153±10	≥50	≥30	——
	DY7329-1S	0.1±0.015	60±8	11±3 %	18±2	43±5	≤1.0	120±20	≥45	≥60	——
	DY7329A	0.13	±0.02	120±11	18±5	24±4	——	≤1.0	160±16	≥10	≤800
	DY7329	0.14	±0.02	160±13	18±6	27±4	——	≤1.0	207±20	≥1.5	——
	DY7329B-1DY7329B-1CR	0.11	±0.02	65±5	12±4	19±2	39±5	≤1.0	135±15	≥40	——
	DY7329B-2DY7329B-2CR	0.075±0.015	0.015	65±5	5±3	——	39±5	≤1.0	109±12	≥50	——
	DY7329H	0.10	100±10	9±3	——	43±5	≤1.0	153±10	≥50	≥30	——
	DY5446-1D	0.13	160±13	10±5	——	35±5	≤1.5	205±20	≥6	≥30	——
	DY5446-1S	0.08	65±10	≤13	36±4	54±4	≤2.0	132±10	≥65	≥50	——
	DY7329C	0.09	76±6	6.5±3.5	——	43±5	≤1.0	125±12	≥5.5	≥35	——
	5446-1S	0.09±0.005	70±10	≤14	36±4	54±4	≤2.0	138±10	≥65	≥50	——
	5461-3D	0.11±0.02	80±5	12±6	27±4	——	≤1.0	——	≥10	≥60	——
	DY7329D	0.13±0.02	140±10	14±6	23±2	——	≤1.0	177±15	≥10	≥80	——
	5442-P	0.075±0.01	65±5	5.5±3	——	42±5	≤1.0	115±13	≥45	≥40	——

Mica plate for Heating Elements

Product Specification 1、Micapaper heat plate is made of micapper coated with heat resisitant resin,heatand pressed to be hard plate. 2、Micapaper plate has high mechanical strength and high temperature resistant,Themal index is up to 600℃。 3、Use for electronic tubes support element and liner of electrical machine and apparatus such as washer, lightening arrester plate and etc.

Technial Specification

Designation	Unit	Index
Designation	Unit	660-1 Heat Micapaper（HP5）
Thickness	mm	0.30；0.40；0.50；0.60；0.80；1.0
Micacontent	%	≥90
Resin Content	%	≤12
Volatile Content	%	≤1.0
Dielectric Strength	MV/m	≥20
Coefficent of Volume Resistance	-	Discussed by both side
Separation rate	%	≤3
Density	g/cm3	≥1.6
Standard	-	GB5022-85

Commutator Segment Plate

Product specification

Commutator segment plate is made of micapaper coated with resin heat and pressed to be hard plate insulation material.

2. It has high mechanical strength and used in commutator between segments.

Technial Specification

Designation	Unit	Index
Designation	Unit	5536-1poxy commutator segments（P9）	DY5550-3 silicone commutator segment plate
Type of micapaper	-	Muscovite micapaper	金粉云母纸
Thickness	mm	0.3-1.5mm（seperat 0.05mm），toherance：average±0.02，individual±0.03
Micacontent	%	≥90	≥94
Resin content	%	≤10	≤6
Diaelectrical strength	MV/m	≥20	≥20
Separation rate	%	≤3	≤3
Density	g/cm3	≥2.2	≥2.4
stander	-	GB5021-85	Company’s specification

Prepreg Insulation Materils Series

Product Specitication： Epoxy phenolic glass prepreg materil is made of glass fabric impreganed with epoxy phendic regin after heating and in rolled form.It posses high machnical strength high dielectric and anticuator. It is used for pole insulation of synchronous machine.D.C.motor V-ing.Slot cell for tubor-generator roto slot.

Technical Specification
Designation unit Epoxy Novolack Prepreg
Thickness mm 0.15±0.02
Resin Content % 40~45
Volatile Content % 1~2
Width mm 500±20
Soluble Resin % ≥90
Standard - Company’s Specification

Designation	unit	Epoxy Novolack Prepreg
Thickness	mm	0.15±0.02
Resin Content	%	40~45
Volatile Content	%	1~2
Width	mm	500±20
Soluble Resin	%	≥90
Standard	-	Company’s Specification

D.C.Machine Commutator V-ring Series

Product Specification 1、V-ring mica is made of class B.H formable mica plated by heat and pressed in the mould. 2、These products uniform in thickness,not loose,no separation and sound noise,used for traction motor and D.C.motor commutator insulation.

Technical Specification:

Type and specification	Thickness（mm）	Height（mm）	Test Voltage（kv/60s）	Standard
YH80（double unit）	1.5±0.1	61/38	4.3	Q/321181PAY001-2002
YH80（single unit）	1.5±0.1	53	4.3
YH80	1.6±0.1	86	6
YH410	2+0.3 2-0.25	84/54	6
YH410C	2±0.2	90/60	6
YH600	2±0.15	85/55	6
YH700	3±0.3	82/59	10
YH800	3±0.3	84/59	10
YH850	2.4±0.2	82/49	10
SS7	2.4±0.2	74.5/40	10
YH900	2.4±0.1	79/51	10
YH1250	1.6±0.1 2.15±0.1	95/75	10

Series of Micafoil

Products Specification:1、Micafoil is a product of splitting mica or mica paper on one side backed with glass fabric or PET(PI)film with heat resistant resin bond together after heat and pressed.

2、This product is heat resistant antimoisture and formable, use for glass B,F,H electrical machine coils by forming to tube slot cell pole insulation and etc.

Technical Specification:

Designation	unit	Type of products
Designation	unit	5834-1 Epoxy Polyester Glass Fabric Mica paper foil	5840-1 Epoxy PI film Glass Mica paper Foil	5834-1Epoxy Polyester Film Mica paper Foil	5850 Silicome Glass Fabric Mica paper Foil
Thickness	mm	0.15；0.17；0.20	0.15；0.17；0.20	0.15；0.17；0.20	0.15；0.20；0.25；0.30
Resign	%	≥30	≥30	≥30	≥50
Adhesive content	%	25~35	25~35	25~35	15~35
Volatile content	MV/m	≤1.0	≤1.0	≤1.0	≤1.0
Dielectrical Strength	_	≥45	≥45	≥45	≥16
Formable	℃	At110±5℃ cn be formed for 15 min			130±5℃ 15min formable to tube
Thermal Index	_	≥130	≥155	≥155	≥180
Standard	_	JB/T901—1995